Hard Rock Conveyor Projects

Toromocho

Chinalco, Toromocho, Peru

Commissioning 2014
Role- Designer
Client- Aker Solutions

Antapaccay

Xstrata, Antapaccay, Peru

Commissioned 2012
Role- Auditor
Client- ThyssenKrupp Robins

Features 2 x 3,800 kW Siemens Gearless Drives and is in operation since Nov. 2012.

See Gearless Drive Video
Jim Walters

Barrick Gold, Cortez Hills, USA

Commissioned 2009
Role- Designer
Client- ThyssenKrupp Robins

Overland Conveyor Co was selected to provide specialized design support for the development of unique and custom control algorithms for a 11.6 km overland. The system consists of several individual conveyors totaling over 14.5 km in length with the 11.6 km centerpiece curving horizontally down a large hill. Conveying capacity is set at 1000 tons per hour.

Jim Walters

Heidelberg Cement, CADMAN, USA

Commissioned 2006
Role- Designer
Client- ThyssenKrupp Robins

This downhill conveyor was designed for Cadman’s new limestone quarry in Washington State. The conveyor is designed to carry 1000 tph down the hill and 400 tph back up the return side. It overcomes difficult terrain over its length of 2 km, including a vertical drop of 274 m with 14 vertical and 2 horizontal curves, and a maximum slope of 18 degrees.

See Video

Vale

VALE, Soseggo, Brazil

Commissioned 2002
Role- Designer
Client- Metso Minerals

This 3.5 km long, 1200mm wide carries 3000MTPH of iron ore with a total connect power of 1050kW. Because of the unique profile, this conveyor required special attention when stopping. However, a relatively inexpensive capstan was added to the take-up to increase take-up resistance during stopping which provided a simple solution to a potential problem.