|
12640 W Cedar Dr Ste
D
Lakewood, CO 80228
(303) 973-7357 - Office
(303) 217-5208 - Fax
P.O. Box 2707480
Littleton, CO 80127
The
revolutionary way to handle granular and particulate material problems
through numeric simulation
|
|
| |
 |
 |
|
|
|
| The following list of publications have been published
or presented by OCC associates. |
| |
| A.V. Reicks, T. M. Mess, "Ceramic Lagging-A Good Thing Can Be Costly If Misused" , Submitted to SME, April 2006 |
|
| T.J. Rudolphi , A.V. Reicks, "Viscoeleastic Indentation and Resistance to Motion of Conveyor Belts using a Generalized Maxwell Model of the Backing Material", Submitted to Rubber Chemistry and Technology, February 2006. |
|
| E.A. Viren, M. A. Alspaugh, "Increasing Reliablity with Virtual Prototyping", Presented at MineWest 2005, Denver, CO, USA, November 17, 2005. |
|
| M. A. Alspaugh, "Longer Overland Conveyors with Distributed Power and Controls", Presented at Rockwell Automation Fair, St Louis, MO, November 15, 2005 |
|
M. A. Alspaugh, "Coal Conveyance- System Design vs. Reliability", Presented to
PRB Coal Users' Group, Chicago, IL, April 5-7, 2005 |
|
| M. A. Alspaugh, "Latest Developments in Belt Conveyor Technology", Presented at MinExpo 2004, Las Vegas, NV, USA, September 27, 2004. |
|
| G. Dewicki, E. O'Donovan, "Maximising Longwall Production by Optimising the Coal Clearance System" |
|
| A.V. Reicks, T.J. Rudolphi, "The Importance and Prediction of Tension Distribution Around the Conveyor Belt Path", Presented at 2004 SME Annual Meeting, Denver, CO, February 2004 |
|
| M.A. Alspaugh, E.A. Viren, "The Evolution of Intermediate Driven Belt Conveyor Technology", Presented at 2004 SME Annual Meeting, Denver, CO, February 2004 |
|
| E.A. Viren, "A Comparison of Drive Starting Mechanisms for Aggregate Belt Conveyors", Presented at 2003 SME Annual Meeting, February 2003. |
|
| G. Dewicki, M Alspaugh, "Advanced Design Considerations Required for Overland Aggregate Conveyors", Presented at 2003 SME Annual Meeting, February 2003. |
|
| G. Dewicki, "Bulk Material Handling and Processing- Numerical Techniques and Simulation of Granular Material", Bulk Solids Handling, Vol 23, 2003. |
|
| M.A. Alspaugh, "The Evoluation of Intermediate Driven Belt Conveyor Technology", Bulk Solids Handling, Vol 23, 2003. |
|
| G. Dewicki, G Mustoe, "Bulk Material Belt Conveyor Transfer Point Simulation of Material Flow using DEM", Presented at Third International Conference on DEMs, Sante Fe, NM, USA, September 23-25, 2002. |
|
| M. Alspaugh, G. Dewicki, E Quesenberry, "Computer Simuation Solves Conveyor Problems ", Coal Age, Janary 2002. |
|
| P.K. Sollars, E.J. Brady, M.A. Alspaugh, "Twentymile Coal Company's Underground Conveyance System", Presented at minExpo 2000, Las Vegas NV, USA October 10, 2000. |
|
| P.K. Sollars, M.A. Alspaugh, "Twentymile Coal's East Mine District Panel Conveyor System", Presented at 1998 SME Annual Meeting, Orlando, FL, USA, February 1998. |
|
| M.A. Alspaugh, R.J. Ganey, "Continuous Production Obtained by Usage of High Efficiency Tunnel Boring Machines and Continuously Advancing Conveyors", Presented at London '94 Tunnel. |
|
| J.A. Dos Santos, J.R. McGaha, "Modern Continuous Haulage Systems and Equipment", Journal of Mines, Metals, and Fuels, May-June 1994. |
|
| M.A. Alspaugh, R.J. Wise, "Intermediate Booster Drives aid Longwall Mining", Mining Engineering, March 1993. |
|
| M. Alspaugh, R.J. Wise, "The Design and Operation of an Underground Conveyor Utilizing Intermediate Booster Drives with DC Motors and Controls", Conveyor Belt Engineering for the Coal and Mineral Mining Industries, 1993. |
|
|
| |
|
|
 |
|
 |
|
|
|
| |
Webmail
| Clients Page
Copyright 2004 Overland Conveyor Inc. All rights
reserved.
|
|
|
|
